簡要描述:ELS-950是所有進口光電液位開關里體積Z小的一款,但它也帶有Z高操作溫度的能力,該產品聚砜的材質,確保這傳感器是兼容的使用在廣泛的媒體。該ELS-950進口光電液位開關的設計特點是過分成型電子插入,熱塑性彈性體的絕緣電線,氟O形密封圈創建節水型緊湊,耐環境大會。該ELS-950進口光電液位開關是一個很好的價值,使其成為一個*的選擇工業原始設備制造商渴望極少數,沒有任何運動部件傳感器額定的高溫
北京恒遠安諾科技有限公司經銷各種歐美*液位計
ELS950光電液位開關
產品描述:
熱塑性彈性體的過度模鑄電子
沒有運動部件
耐用,足以應付惡劣的環境中
ELS-950是所有進口光電液位開關里體積zui小的一款,但它也帶有zui高操作溫度的能力,該產品聚砜的材質,確保這傳感器是兼容的使用在廣泛的媒體。該ELS-950進口光電液位開關的設計特點是過分成型電子插入,熱塑性彈性體的絕緣電線,氟O形密封圈創建節水型緊湊,耐環境大會。該ELS-950進口光電液位開關是一個很好的價值,使其成為一個*的選擇工業原始設備制造商渴望極少數,沒有任何運動部件傳感器額定的高溫天氣。
應用領域:
制冷劑水庫監測和預警
醫療診斷,滅菌器,洗衣機和透析設備
低潤滑劑警告,對機床,發電機組,對-或關閉公路的車輛
低水平的警告在液壓水庫
塑料溢出瓶,塑料散熱器
技術參數:
材質 聚砜
工作壓力 0-250 PSI
工作溫度 -40-110°C
吸入電流 約18mA
輸入電壓 5VDC或12VDC
輸出 TTL/CMOS兼容集電極開路輸出的zui大吸入電流為40mA,zui大30VDC
重復性 ±1mm
認證 CE, UL
FMU30超聲波液位計
產品描述:
FMU30超聲波液位計——德國E+H超聲波液位計,能*替代FMU231E-AA32和FMU230的超聲波液位計FMU30,
FMU30超聲波液位計性能參數
FMU30超聲波液位計液體量程:5m OR 8m
分辨率:1mm
精度:±3 mm OR 0.2%
盲區:25cm OR 35cm
供電:24VDC(標準);220VAC(可選)
FMU30超聲波液位計顯示:清晰的多行文本圖解顯示、包絡線顯示
輸出:4-20mA
過程連接:1-1/2"(5m),2"(8m)
外殼材質:F16塑料 透明顯示蓋
FMU30超聲波液位計優勢特性
是FMU230、FMU231的理想升級替代品
防護等級好,性價比高
菜單引導功能,輕松實現現場操作
FMU30超聲波液位計典型應用
污水提升泵站、污水處理池
廢水、泥漿、石灰漿
地下油罐
流動性好的固體粉料、顆粒料
超聲波液位計FMU30-AAHEAAGGF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AA] 傳感器: 1-1/2"; 5m 液體/2m 固體; 0.25m
[GGF] 過程連接: 螺紋 ISO228 G1-1/2, PP
超聲波液位計FMU30-AAHEABGHF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AB] 傳感器: 2"; 8m 液體/3.5m 固體; 0.35m
[GHF] 過程連接: 螺紋 ISO228 G2, PP
應用
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
1.FMU 230
固體測量范圍:2m
液體測量范圍:4m
2. FMU231E-AA32
固體測量范圍:3.5m
液體測量范圍:7m
兩種變送器都配有一體化的溫度傳感器,用于對時間行程測量原理的補償。
性能和優點
1. 螺紋連接G1?",1?NPT"或G2",2"NPT
2. 可旋轉外殼
3. 帶可選現場顯示,按鈕操作簡便
4. LED發光顯示能快速監測操作狀態
5. 兩線制供電
FMU231E-AA32優點:
■ 非接觸測量,與材料特性幾乎無關
■ 集成溫度傳感器的傳輸時間修正,甚至溫度變化時,測量仍然準確
■ 測量值以任意單位輸出的線性化功能
■ 帶可選擇的顯示器
■ 通過 G1?"、G2"、NPT 1?" 或 NPT 2" 螺絲簡單固定
■ 二線制儀表,物位由 4-20 mA 輸出電流顯示
■ 可旋轉外殼
■ 帶可選現場顯示,按鈕操作簡便
■ LED發光顯示能快速監測操作狀態
■ 兩線制供電
FMU231E-AA32性能特點
參考工作條件 在下列參考條件下,的性能特點有效:
■ 溫度 = +20 °C
■ 壓力 = 1013 mbar abs.
■ 濕度 = 60 %
■ 理想的反射面(如平靜、平坦的液體表面)
■ 信號波束內無干擾反射
U001-0063液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
flow.
技術參數:
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durableMaximum Temperature Rating 135°C (300°F) Operating Temperature Electronics: 20° to 65°C (14° to 150°F) Pressure Drop 0.5 psi or less @ 10ft/sec for all pipe sizes 1.5" dia and up Accuracy ±1% of rate over optimum flow range* Repeatability ±0.5% =10 upstream and =5 downstream straight pipe diameters, uninterrupted
U001-0098液位計
產品描述:
Cast brass construction with tungsten carbide and stainless steel meter...long, trouble-free life Rugged, compact design with two temperature probes
Minimal connections...simplify installation, saving time and money
Integration of flow and temperature sensors with metering components...single simple solution for metering
Pulse, BACnet, and Modbus protocols are standard features...compatibility with existing control systems
Multiple size options...installation flexibility
Nine visible status LEDs (power, run, pulse, and more)
Liquid-tight wiring ports for reliability
NEMA 4 housing for durability
Input Power 12-35VDC/12-28VAC
Communication Modbus RTU, BACnet MSTP, Pulse
Output Scaled pulse, open drain
Accuracy ±3% flow
Housing NEMA 4
技術參數:
Housing Polycarbonate
Flow Sensor PEEK/stainless steel
Potting Material Polyurethane
Tee Material Brass
Environmental:
Fluid Temperature chilled: -20° to 60°C (-4° to 140°F); hot: 4° to 125°C (39° to 257°F)
Ambient Temperature -20° to 65°C (-4° to 149°F)
U001-0021液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
技術參數:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
8137雷達液位計
產品描述:
The Type 8137 is a non-contact radar leveltransmitter for continuous level measurement.The unit is available in two versions:with thread and horn antenna (? 40 mm) particularlysuitable for use in small tanks and process vessels for measurement of practically ny product. with flange and horn antenna (? 40 or 75 mm) particularly suitable for use in storage tanks and process vessels for measurement of products such as solvent, hydrocarbons and fuels under extremely difficult process conditions.
Materials
Housing / Cover
Seal ring / Ground terminal
Wetted parts
Process fitting
Seal (threaded version)
Antenna
Antenna cone
Seal (antenna system)
PBT, Stainless steel 316L / PC
NBR / Stainless steel 316Ti/316L (1.4571/1.4435)
Stainless steel 316L
Klingersil C-4400
Stainless steel 316L
PTFE (TFM 1600 PTFE)
FKM
Display * LCD in full dot matrix (in option)
Process fitting Thread G 1“1/2 A or NPT 1“1/2
Flange DN50 or 100 DIN2501, 2" or 4" ANSI B16.5
Electrical connection Cable glands M20 x 1.5
Measuring type Distance between process fitting and product surface
Min. dielectric figure ?r > 1.6
Dead zone 50 mm
Measuring range 0.05 up to 10 m (recommended - antenna with ? 40 mm)
0.05 up to 30 m (recommended - antenna with ? 75 mm)
Process temperature -40 up to +130°C (-40 to 266 °F)
Vessel pressure -1 up to 40 bar (-14.51 to 580,4 PSI) (-100 up to 4000 kPa) or
according flange rules
Vibration resistance Mechanical vibrations with 4.g and 5...100 Hz
8112液位傳感器
產品描述:
The 8112 is a vibrating level switch for liquids,using a tuning fork for level detection.It is designed for industrial use in areas of process technology and can be used in liquids.Typical applications are overfill or dry run protection.The Type 8112 is available with different sensorlength using tube extension. The rightlength can be adapted thanks to a lock fitting.Due to the simple and rugged measuringsystem, the 8112 is virtually unaffected by thechemical and physical features of the liquid.It works even under unfavourable conditionssuch as turbulence, air bubbles, foam generation,buildup or varying products.
Materials
Housing / Cover / Seal ring
Wetted parts
Tuning fork and process fitting
Extension tube ? 21.3
Process seal
PBT, Stainless steel 316L (1.4435) / PC / EPDM
Stainless steel 316L (1.4435)
Stainless steel 316L (1.4435)
FKM
Weight approx. 890 g + approx. 110 g/m (tube extension)
Electrical connections 1 or 2 cable glands M20 x 1.5 (depends on output version)
Process fitting Thread G, NPT 3/4", G, NPT 1" or Clamp 2"
Surface finishing quality Ra < 3.2 μm (thread) / Ra < 0.8 μm (Clamp)
Extension tube length 200 ... 1000 mm
Viscosity dynamic 0.1 up to 10000 mPa.s (requirement: with density 1)
Density 0.5 up to 2.5 g/cm3 (selected by DIP switch) or 0.7 up to 2.5 g/cm3
Fluid temperature -50 up to 150°C (-58 to 302°F)
Fluid pressure -1 to 64 bar (-14.51 to 928.64 PSI)
Accuracy
Hysteresis
Delay time / Frequency
Approx. 2 mm with vertical installation
Approx. 500 ms / Approx. 1200 Hz
Output Double relay output or Namur output
Environment
Ambient temperature -40 up to +70°C (-40 to 158°F) (Operating);
-40 up to +80°C (-40 to 176°F) (Storage)
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
FMI51電容式液位計
產品描述:
產品簡介
智能變送器,用于連續物位測量,經濟型4...20mA兩線制技術,適用于
危險區域
產品應用
一體化變送器用于液體的連續物位測量,且當液體的電導率達100μS/cm時測量與介電常數(DK)無關。因此可用于測量多種液體,且無須重復標定。
產品性能
當介質電導率達100μS/cm時無須標定
適用于測量界面
多種證書和認證,能夠在各種場合下應用
符合IEC61508功能安全SIL2的要求,可應用于安全系統中
接觸過程的部分材質為耐腐蝕性材質,接觸介質部分為FDA-listed材質
測量值響應時間短,為0.3s
更換電子插件后無須重新標定
電子插件自監視功能
多種過程連接,也可用于衛生場合
內置補償
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FTM51音叉料位開關
產品描述:
應用于細顆粒固體散料的限位監測,適用于防爆危險區
用于對粉料、細顆粒散料以及低密度散料進行控測的限位開關。品種齊全,應用廣泛,亦可用于粉塵或易燃氣體危險區。
帶延伸管,zui大4m,可在任何位置安裝
例:鋁質外殼(T13)帶獨立的連接腔室EEx de
典型應用:谷粒 、面粉、奶粉、可可粉、糖、動物飼料、洗滌粉、染料、粉料、石灰、水泥、沙粒、塑料粒子
性能和優點
固體散料限位檢測的產品,從1967年起就已投入實際應用中
無需標定:操作簡便,經濟實用(即插即用)
無機械部件:使用壽命長
對外部震動和粘結不敏感:免維護
開關狀態可通過表蓋上的視鏡顯示,便于監視
多種電子插件,例如:NAMUR,繼電器、晶閘管、PFM-信號輸出,用于可與工廠控制系統連接
通過塑料外殼F10的透明蓋可以監視開關狀態及進行簡單操作
短叉型(100mm叉體長度)
可選堆積和磨損顯示
可選密度設置和開關延遲
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
Model F50液位開關
產品描述:
Magnetrol flow switches are highly reliable devices utilized to sense the presence or absence of flow in horizontal pipelines. Disc actuated Model F50 switches are in-line type used for sensing clean liquids in 2 inch or smaller line sizes.
No calibration required
Bronze or stainless steel construction
Process pressures to 1150 psig (69 bar)
Process temperatures to +750° F (+399° C)
Actuation on increasing or decreasing flow
In-line mounting
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Tuffy? II浮球液位控制器
產品描述:
The Tuffy? II Liquid Level Switches are float-actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact size allows for installation in small vessels, while its many features provide a variety of application uses. The single switch mechanism is available in SPDT or DPDT forms on units designed for fixed or adjustable, narrow or wide differential and interface service levels.
Features
Single electric switch for high or low level alarm or control functions
Spacious switch wiring compartment
Pressure ratings to 2160 psig (149 bar)
Process temperatures to +750° F (+399° C)
NACE and/or ASME B31.3 construction
Specific gravity as low as 0.40
Therma? TG1熱分散開關
產品描述:
Therma TG1 provides a two-wire, intrinsically safe circuit between the probe and remote din rail enclosure. The switch is suitable for liquid or gas flow, level, or interface detection using the proven thermal dispersion technology.
LEDs provide visual flow indication
24 VDC input power
mA output signal for diagnostics and repeatable flow/level indication
Adjustable set point and time delay
SPDT Alarm relay
OCT-400模擬發射機
產品描述:
The OCT-400 analog transmitter mounts directly to the side of the Atlas or Gemini Chamber, providing a continuous 4-20 mA output signal proportional to liquid level.
Using simple and reliable reed switches, surface mounted to a printed circuit board, the unit provides level accuracy of 0.50".
Each unit is manufactured with a stainless steel outer tube, which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations, and carries CSA approval.
The OCT-400 analog transmitter mounts directly to the side of the MLI chamber, providing a continuous 4-20 mA output signal proportional to liquid level. Using simple and reliable reed switches surface mounted to a printed circuit board, the unit provides level accuracy of ±0.50" (13 mm). Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.
Each unit is manufactured with a stainless steel outer tube which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations.
Echo? 335四線非接觸式超聲波發射器
產品描述:
Echo Model 335 is a four-wire, integtal mount, ultrasonic non-contact transmitter for liquid level, volume, and open channel flow measurement. Featuring advanced digital signal processing and a powerful transducer, this versatile transmitter provides exceptional measurement performance in a wide variety of applications.
Plug-in 6-digit alphanumeric LCD module with custom graphics display
4-20 mA output with 600 ohm load
Advanced digital signal processing assures reliable measurement in difficult applications
Dual function bar graph displays echo signal strength or tank level
50 kHz transducer with 26 feet (8 meter) range
Narrow, 7 degree beam angle provides excellent performance in tanks with obstructions
Digital E3 Modulevel? 電子液位傳輸器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Kotron? 822/832/842多點式液位開關
產品描述:
The Sentinel is a powerful multi-point level switch for alarm or control applications. The microprocessor-based circuitry permits calibration with only a small change in level. Push buttons and display permit ease in calibration and set up.
Two to four relays yield wide application range
Optional intrinsically safe probe circuitry
3-button/4-digit display of data entry
Lead/Lag pump control
Continuous self-test
Eclipse? Enhanced 705導波雷達發射機
產品描述:
The Enhanced Eclipse Model 705 is now available with a 304 stainless steel housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements for the wetted and non-wetted materials, process connections, and surface finishes for the sanitary industries.
The Enhanced Eclipse Model 705 is a loop-powered, 24 VDC, level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology and is the easiest to configure transmitter on the market.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending flexibility.
Two-wire, 24 VDC, loop-powered, 4-20 mAdc level transmitter
Capable of "dry validation procedures" for extra cost savings
Probe designs for CIP & SIP cleaning
0.1% of span accuracy
0.025% of volume repeatability
Bent probes minimize retention volumes
Therma? TD2流量開關
產品描述:
Designed for use specifically in the clean or hygienic process industry, the Therma TD2 is an outstanding flow/level switch where easy external wipedown and a sensor free of cracks and crevices are required. The TD2 Thermal Dispersion Flow/Level switch provides continuous diagnostics, temperature compensation, narrow hysteresis, and fast response time for superior performance.
The TD2 switch uses either AC or DC input power, provides a DPDT relay output with a visual LED indication of status through the glass window in the cover. Other features include ability to electronically measure the set point, a mA output signal for trending and diagnostics and time delay.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
A non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence/absence of flow
Simple/fast calibration
Excellent low flow sensitivity
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Eclipse? Enhanced 705導波雷達發射器
產品描述:
The Enhanced Eclipse Model 705 is a 24 VDC loop-powered level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%, allowing it to be used in SIL 2 loops.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and troubleshooting flexibility.
Low dielectric measurement capability (Er >_ 1.4)
Volumetric output
Quick connect/disconnect probe coupling
Operates in visible vapors and ignores most foams
IS, XP, and Non-Incendive approvals
Ignores coating buildup
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Therma? TD1/TD2液位開關
產品描述:
Therma Model TD1/TD2 flow/level/interface switches provide a new level of performance and reliability not found in previous switches. Continuous diagnostics with fault indication, temperature compensation, narrow hysteresis and fast response time make the TD1/TD2 the latest in thermal dispersion switch technology.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
Non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence / absence of flow
Easy / fast calibration
Excellent low flow sensitivity
Modulevel? 氣動置換液位控制器
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
高壓外部液位開關
產品描述:
Displacer actuated external cage liquid level switches are external cage units that utilize a single switch mechanism for level alarm or control functions in higher pressure applications.
Features:
Fabricated carbon steel cages
B74 available with 304 or 316 stainless steel cages as standard
Sealed or flanged cages
Stainless steel displacers
Pressures to 5000 psig (345 bar)
Specific gravity as low as 0.40
Aurora?Magnetic液面指示器
產品描述:
Aurora combines the operating system of a conventional float-based MLI with the leading-edge Eclipse Guided Wave Radar transmitter developed for level measurement applications by Magnetrol. The result is true level-measurement redundancy in a single-chamber design.
Using a 3" or 4" chamber to house both the Eclipse coaxial style probe and the float, these devices operate seamlessly to provide continuous electronic Guided Wave Radar measurement and visual indication. There are six basic configuration styles, and over fifteen material selections for the Aurora.
For the first time ever, the ability to accuray and repeatedly measure ultra low dielectric media, high temperature/high pressure process conditions, and media with shifting and changing dielectric values can be accomplished with Aurora.
Measurement Principle
Change in the process tank level corresponds to change within the Aurora chamber. The float within the chamber actuates flags or a shuttle for visual indication while the Eclipse? GWR transmitter provides continuous electronic level measurement.
Features
· Eclipse GWR transmitter
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Custom scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1796.8 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Technical Comparison
Size: 153.8 kb
Enhanced Jupiter?磁致伸縮液面信號傳送器
產品描述:
The Jupiter Magnetostrictive level transmitter provides a 4-20 mA output, proportional to the level being measured. Jupiter models are designed to attach quickly and easily, via standard clamps, to Orion’s Atlas and Gemini magnetic level indicators or can be directly inserted into a wide variety of process vessels.
Packaged in an ergonomic dual compartment enclosure, the unit offers many features not found in typical magnetostrictive units today. The dual compartment design allows for separation of wiring and electronics and helps facilitate simple, easy installation and set-up for both top and bottom mount versions.
With a Jupiter Magnetostrictive Transmitter, an Orion MLI offers high accuracy and high linearity at a reasonable price.
Measurement Principle
A low energy pulse, generated by the Jupiter electronics, travels the length of the magnetostrictive wire. A return signal is generated from the precise location where the magnetic field of a float intersects the wire. A timer precisely measures the elapsed time between the generation of the pulse, and the return of the acoustic signal.
Features
· 4-20 mA output
· LCD with pushbutton operation
· Ergonomic dual compartment enclosure
· Simple set-up and configuration
· Easy attachment to an MLI
· Direct insertion for a wide variety of vessels and applications
Applications
· Separators
· Surge Tanks
· Gas Chillers
· Biotherapuetics
· Pharmaceuticals
· Process Vessels
Options
· HART? Communications
· Hasloy? or Monel? materials of construction
· Threaded or flanged process connections
· External Jupiter models can be top or bottom mounted to an MLI
Product Literature
Sales Literature
Size: 834.6 kb
Fieldbus Instruction Manual
Size: 985.8 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Standard Instruction Manual
Size: 1070.6 kb
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration
北京恒遠安諾科技有限公司經銷各種歐美*液位計
ELS950光電液位開關
產品描述:
熱塑性彈性體的過度模鑄電子
沒有運動部件
耐用,足以應付惡劣的環境中
ELS-950是所有進口光電液位開關里體積zui小的一款,但它也帶有zui高操作溫度的能力,該產品聚砜的材質,確保這傳感器是兼容的使用在廣泛的媒體。該ELS-950進口光電液位開關的設計特點是過分成型電子插入,熱塑性彈性體的絕緣電線,氟O形密封圈創建節水型緊湊,耐環境大會。該ELS-950進口光電液位開關是一個很好的價值,使其成為一個*的選擇工業原始設備制造商渴望極少數,沒有任何運動部件傳感器額定的高溫天氣。
應用領域:
制冷劑水庫監測和預警
醫療診斷,滅菌器,洗衣機和透析設備
低潤滑劑警告,對機床,發電機組,對-或關閉公路的車輛
低水平的警告在液壓水庫
塑料溢出瓶,塑料散熱器
技術參數:
材質 聚砜
工作壓力 0-250 PSI
工作溫度 -40-110°C
吸入電流 約18mA
輸入電壓 5VDC或12VDC
輸出 TTL/CMOS兼容集電極開路輸出的zui大吸入電流為40mA,zui大30VDC
重復性 ±1mm
認證 CE, UL
FMU30超聲波液位計
產品描述:
FMU30超聲波液位計——德國E+H超聲波液位計,能*替代FMU231E-AA32和FMU230的超聲波液位計FMU30,
FMU30超聲波液位計性能參數
FMU30超聲波液位計液體量程:5m OR 8m
分辨率:1mm
精度:±3 mm OR 0.2%
盲區:25cm OR 35cm
供電:24VDC(標準);220VAC(可選)
FMU30超聲波液位計顯示:清晰的多行文本圖解顯示、包絡線顯示
輸出:4-20mA
過程連接:1-1/2"(5m),2"(8m)
外殼材質:F16塑料 透明顯示蓋
FMU30超聲波液位計優勢特性
是FMU230、FMU231的理想升級替代品
防護等級好,性價比高
菜單引導功能,輕松實現現場操作
FMU30超聲波液位計典型應用
污水提升泵站、污水處理池
廢水、泥漿、石灰漿
地下油罐
流動性好的固體粉料、顆粒料
超聲波液位計FMU30-AAHEAAGGF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AA] 傳感器: 1-1/2"; 5m 液體/2m 固體; 0.25m
[GGF] 過程連接: 螺紋 ISO228 G1-1/2, PP
超聲波液位計FMU30-AAHEABGHF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AB] 傳感器: 2"; 8m 液體/3.5m 固體; 0.35m
[GHF] 過程連接: 螺紋 ISO228 G2, PP
應用
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
1.FMU 230
固體測量范圍:2m
液體測量范圍:4m
2. FMU231E-AA32
固體測量范圍:3.5m
液體測量范圍:7m
兩種變送器都配有一體化的溫度傳感器,用于對時間行程測量原理的補償。
性能和優點
1. 螺紋連接G1?",1?NPT"或G2",2"NPT
2. 可旋轉外殼
3. 帶可選現場顯示,按鈕操作簡便
4. LED發光顯示能快速監測操作狀態
5. 兩線制供電
FMU231E-AA32優點:
■ 非接觸測量,與材料特性幾乎無關
■ 集成溫度傳感器的傳輸時間修正,甚至溫度變化時,測量仍然準確
■ 測量值以任意單位輸出的線性化功能
■ 帶可選擇的顯示器
■ 通過 G1?"、G2"、NPT 1?" 或 NPT 2" 螺絲簡單固定
■ 二線制儀表,物位由 4-20 mA 輸出電流顯示
■ 可旋轉外殼
■ 帶可選現場顯示,按鈕操作簡便
■ LED發光顯示能快速監測操作狀態
■ 兩線制供電
FMU231E-AA32性能特點
參考工作條件 在下列參考條件下,的性能特點有效:
■ 溫度 = +20 °C
■ 壓力 = 1013 mbar abs.
■ 濕度 = 60 %
■ 理想的反射面(如平靜、平坦的液體表面)
■ 信號波束內無干擾反射
U001-0063液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
flow.
技術參數:
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durableMaximum Temperature Rating 135°C (300°F) Operating Temperature Electronics: 20° to 65°C (14° to 150°F) Pressure Drop 0.5 psi or less @ 10ft/sec for all pipe sizes 1.5" dia and up Accuracy ±1% of rate over optimum flow range* Repeatability ±0.5% =10 upstream and =5 downstream straight pipe diameters, uninterrupted
U001-0098液位計
產品描述:
Cast brass construction with tungsten carbide and stainless steel meter...long, trouble-free life Rugged, compact design with two temperature probes
Minimal connections...simplify installation, saving time and money
Integration of flow and temperature sensors with metering components...single simple solution for metering
Pulse, BACnet, and Modbus protocols are standard features...compatibility with existing control systems
Multiple size options...installation flexibility
Nine visible status LEDs (power, run, pulse, and more)
Liquid-tight wiring ports for reliability
NEMA 4 housing for durability
Input Power 12-35VDC/12-28VAC
Communication Modbus RTU, BACnet MSTP, Pulse
Output Scaled pulse, open drain
Accuracy ±3% flow
Housing NEMA 4
技術參數:
Housing Polycarbonate
Flow Sensor PEEK/stainless steel
Potting Material Polyurethane
Tee Material Brass
Environmental:
Fluid Temperature chilled: -20° to 60°C (-4° to 140°F); hot: 4° to 125°C (39° to 257°F)
Ambient Temperature -20° to 65°C (-4° to 149°F)
U001-0021液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
技術參數:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
8137雷達液位計
產品描述:
The Type 8137 is a non-contact radar leveltransmitter for continuous level measurement.The unit is available in two versions:with thread and horn antenna (? 40 mm) particularlysuitable for use in small tanks and process vessels for measurement of practically ny product. with flange and horn antenna (? 40 or 75 mm) particularly suitable for use in storage tanks and process vessels for measurement of products such as solvent, hydrocarbons and fuels under extremely difficult process conditions.
Materials
Housing / Cover
Seal ring / Ground terminal
Wetted parts
Process fitting
Seal (threaded version)
Antenna
Antenna cone
Seal (antenna system)
PBT, Stainless steel 316L / PC
NBR / Stainless steel 316Ti/316L (1.4571/1.4435)
Stainless steel 316L
Klingersil C-4400
Stainless steel 316L
PTFE (TFM 1600 PTFE)
FKM
Display * LCD in full dot matrix (in option)
Process fitting Thread G 1“1/2 A or NPT 1“1/2
Flange DN50 or 100 DIN2501, 2" or 4" ANSI B16.5
Electrical connection Cable glands M20 x 1.5
Measuring type Distance between process fitting and product surface
Min. dielectric figure ?r > 1.6
Dead zone 50 mm
Measuring range 0.05 up to 10 m (recommended - antenna with ? 40 mm)
0.05 up to 30 m (recommended - antenna with ? 75 mm)
Process temperature -40 up to +130°C (-40 to 266 °F)
Vessel pressure -1 up to 40 bar (-14.51 to 580,4 PSI) (-100 up to 4000 kPa) or
according flange rules
Vibration resistance Mechanical vibrations with 4.g and 5...100 Hz
8112液位傳感器
產品描述:
The 8112 is a vibrating level switch for liquids,using a tuning fork for level detection.It is designed for industrial use in areas of process technology and can be used in liquids.Typical applications are overfill or dry run protection.The Type 8112 is available with different sensorlength using tube extension. The rightlength can be adapted thanks to a lock fitting.Due to the simple and rugged measuringsystem, the 8112 is virtually unaffected by thechemical and physical features of the liquid.It works even under unfavourable conditionssuch as turbulence, air bubbles, foam generation,buildup or varying products.
Materials
Housing / Cover / Seal ring
Wetted parts
Tuning fork and process fitting
Extension tube ? 21.3
Process seal
PBT, Stainless steel 316L (1.4435) / PC / EPDM
Stainless steel 316L (1.4435)
Stainless steel 316L (1.4435)
FKM
Weight approx. 890 g + approx. 110 g/m (tube extension)
Electrical connections 1 or 2 cable glands M20 x 1.5 (depends on output version)
Process fitting Thread G, NPT 3/4", G, NPT 1" or Clamp 2"
Surface finishing quality Ra < 3.2 μm (thread) / Ra < 0.8 μm (Clamp)
Extension tube length 200 ... 1000 mm
Viscosity dynamic 0.1 up to 10000 mPa.s (requirement: with density 1)
Density 0.5 up to 2.5 g/cm3 (selected by DIP switch) or 0.7 up to 2.5 g/cm3
Fluid temperature -50 up to 150°C (-58 to 302°F)
Fluid pressure -1 to 64 bar (-14.51 to 928.64 PSI)
Accuracy
Hysteresis
Delay time / Frequency
Approx. 2 mm with vertical installation
Approx. 500 ms / Approx. 1200 Hz
Output Double relay output or Namur output
Environment
Ambient temperature -40 up to +70°C (-40 to 158°F) (Operating);
-40 up to +80°C (-40 to 176°F) (Storage)
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
FMI51電容式液位計
產品描述:
產品簡介
智能變送器,用于連續物位測量,經濟型4...20mA兩線制技術,適用于
危險區域
產品應用
一體化變送器用于液體的連續物位測量,且當液體的電導率達100μS/cm時測量與介電常數(DK)無關。因此可用于測量多種液體,且無須重復標定。
產品性能
當介質電導率達100μS/cm時無須標定
適用于測量界面
多種證書和認證,能夠在各種場合下應用
符合IEC61508功能安全SIL2的要求,可應用于安全系統中
接觸過程的部分材質為耐腐蝕性材質,接觸介質部分為FDA-listed材質
測量值響應時間短,為0.3s
更換電子插件后無須重新標定
電子插件自監視功能
多種過程連接,也可用于衛生場合
內置補償
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FTM51音叉料位開關
產品描述:
應用于細顆粒固體散料的限位監測,適用于防爆危險區
用于對粉料、細顆粒散料以及低密度散料進行控測的限位開關。品種齊全,應用廣泛,亦可用于粉塵或易燃氣體危險區。
帶延伸管,zui大4m,可在任何位置安裝
例:鋁質外殼(T13)帶獨立的連接腔室EEx de
典型應用:谷粒 、面粉、奶粉、可可粉、糖、動物飼料、洗滌粉、染料、粉料、石灰、水泥、沙粒、塑料粒子
性能和優點
固體散料限位檢測的產品,從1967年起就已投入實際應用中
無需標定:操作簡便,經濟實用(即插即用)
無機械部件:使用壽命長
對外部震動和粘結不敏感:免維護
開關狀態可通過表蓋上的視鏡顯示,便于監視
多種電子插件,例如:NAMUR,繼電器、晶閘管、PFM-信號輸出,用于可與工廠控制系統連接
通過塑料外殼F10的透明蓋可以監視開關狀態及進行簡單操作
短叉型(100mm叉體長度)
可選堆積和磨損顯示
可選密度設置和開關延遲
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
Model F50液位開關
產品描述:
Magnetrol flow switches are highly reliable devices utilized to sense the presence or absence of flow in horizontal pipelines. Disc actuated Model F50 switches are in-line type used for sensing clean liquids in 2 inch or smaller line sizes.
No calibration required
Bronze or stainless steel construction
Process pressures to 1150 psig (69 bar)
Process temperatures to +750° F (+399° C)
Actuation on increasing or decreasing flow
In-line mounting
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Tuffy? II浮球液位控制器
產品描述:
The Tuffy? II Liquid Level Switches are float-actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact size allows for installation in small vessels, while its many features provide a variety of application uses. The single switch mechanism is available in SPDT or DPDT forms on units designed for fixed or adjustable, narrow or wide differential and interface service levels.
Features
Single electric switch for high or low level alarm or control functions
Spacious switch wiring compartment
Pressure ratings to 2160 psig (149 bar)
Process temperatures to +750° F (+399° C)
NACE and/or ASME B31.3 construction
Specific gravity as low as 0.40
Therma? TG1熱分散開關
產品描述:
Therma TG1 provides a two-wire, intrinsically safe circuit between the probe and remote din rail enclosure. The switch is suitable for liquid or gas flow, level, or interface detection using the proven thermal dispersion technology.
LEDs provide visual flow indication
24 VDC input power
mA output signal for diagnostics and repeatable flow/level indication
Adjustable set point and time delay
SPDT Alarm relay
OCT-400模擬發射機
產品描述:
The OCT-400 analog transmitter mounts directly to the side of the Atlas or Gemini Chamber, providing a continuous 4-20 mA output signal proportional to liquid level.
Using simple and reliable reed switches, surface mounted to a printed circuit board, the unit provides level accuracy of 0.50".
Each unit is manufactured with a stainless steel outer tube, which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations, and carries CSA approval.
The OCT-400 analog transmitter mounts directly to the side of the MLI chamber, providing a continuous 4-20 mA output signal proportional to liquid level. Using simple and reliable reed switches surface mounted to a printed circuit board, the unit provides level accuracy of ±0.50" (13 mm). Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.
Each unit is manufactured with a stainless steel outer tube which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations.
Echo? 335四線非接觸式超聲波發射器
產品描述:
Echo Model 335 is a four-wire, integtal mount, ultrasonic non-contact transmitter for liquid level, volume, and open channel flow measurement. Featuring advanced digital signal processing and a powerful transducer, this versatile transmitter provides exceptional measurement performance in a wide variety of applications.
Plug-in 6-digit alphanumeric LCD module with custom graphics display
4-20 mA output with 600 ohm load
Advanced digital signal processing assures reliable measurement in difficult applications
Dual function bar graph displays echo signal strength or tank level
50 kHz transducer with 26 feet (8 meter) range
Narrow, 7 degree beam angle provides excellent performance in tanks with obstructions
Digital E3 Modulevel? 電子液位傳輸器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Kotron? 822/832/842多點式液位開關
產品描述:
The Sentinel is a powerful multi-point level switch for alarm or control applications. The microprocessor-based circuitry permits calibration with only a small change in level. Push buttons and display permit ease in calibration and set up.
Two to four relays yield wide application range
Optional intrinsically safe probe circuitry
3-button/4-digit display of data entry
Lead/Lag pump control
Continuous self-test
Eclipse? Enhanced 705導波雷達發射機
產品描述:
The Enhanced Eclipse Model 705 is now available with a 304 stainless steel housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements for the wetted and non-wetted materials, process connections, and surface finishes for the sanitary industries.
The Enhanced Eclipse Model 705 is a loop-powered, 24 VDC, level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology and is the easiest to configure transmitter on the market.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending flexibility.
Two-wire, 24 VDC, loop-powered, 4-20 mAdc level transmitter
Capable of "dry validation procedures" for extra cost savings
Probe designs for CIP & SIP cleaning
0.1% of span accuracy
0.025% of volume repeatability
Bent probes minimize retention volumes
Therma? TD2流量開關
產品描述:
Designed for use specifically in the clean or hygienic process industry, the Therma TD2 is an outstanding flow/level switch where easy external wipedown and a sensor free of cracks and crevices are required. The TD2 Thermal Dispersion Flow/Level switch provides continuous diagnostics, temperature compensation, narrow hysteresis, and fast response time for superior performance.
The TD2 switch uses either AC or DC input power, provides a DPDT relay output with a visual LED indication of status through the glass window in the cover. Other features include ability to electronically measure the set point, a mA output signal for trending and diagnostics and time delay.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
A non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence/absence of flow
Simple/fast calibration
Excellent low flow sensitivity
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Eclipse? Enhanced 705導波雷達發射器
產品描述:
The Enhanced Eclipse Model 705 is a 24 VDC loop-powered level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%, allowing it to be used in SIL 2 loops.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and troubleshooting flexibility.
Low dielectric measurement capability (Er >_ 1.4)
Volumetric output
Quick connect/disconnect probe coupling
Operates in visible vapors and ignores most foams
IS, XP, and Non-Incendive approvals
Ignores coating buildup
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Therma? TD1/TD2液位開關
產品描述:
Therma Model TD1/TD2 flow/level/interface switches provide a new level of performance and reliability not found in previous switches. Continuous diagnostics with fault indication, temperature compensation, narrow hysteresis and fast response time make the TD1/TD2 the latest in thermal dispersion switch technology.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
Non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence / absence of flow
Easy / fast calibration
Excellent low flow sensitivity
Modulevel? 氣動置換液位控制器
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
高壓外部液位開關
產品描述:
Displacer actuated external cage liquid level switches are external cage units that utilize a single switch mechanism for level alarm or control functions in higher pressure applications.
Features:
Fabricated carbon steel cages
B74 available with 304 or 316 stainless steel cages as standard
Sealed or flanged cages
Stainless steel displacers
Pressures to 5000 psig (345 bar)
Specific gravity as low as 0.40
Aurora?Magnetic液面指示器
產品描述:
Aurora combines the operating system of a conventional float-based MLI with the leading-edge Eclipse Guided Wave Radar transmitter developed for level measurement applications by Magnetrol. The result is true level-measurement redundancy in a single-chamber design.
Using a 3" or 4" chamber to house both the Eclipse coaxial style probe and the float, these devices operate seamlessly to provide continuous electronic Guided Wave Radar measurement and visual indication. There are six basic configuration styles, and over fifteen material selections for the Aurora.
For the first time ever, the ability to accuray and repeatedly measure ultra low dielectric media, high temperature/high pressure process conditions, and media with shifting and changing dielectric values can be accomplished with Aurora.
Measurement Principle
Change in the process tank level corresponds to change within the Aurora chamber. The float within the chamber actuates flags or a shuttle for visual indication while the Eclipse? GWR transmitter provides continuous electronic level measurement.
Features
· Eclipse GWR transmitter
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Custom scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1796.8 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Technical Comparison
Size: 153.8 kb
Enhanced Jupiter?磁致伸縮液面信號傳送器
產品描述:
The Jupiter Magnetostrictive level transmitter provides a 4-20 mA output, proportional to the level being measured. Jupiter models are designed to attach quickly and easily, via standard clamps, to Orion’s Atlas and Gemini magnetic level indicators or can be directly inserted into a wide variety of process vessels.
Packaged in an ergonomic dual compartment enclosure, the unit offers many features not found in typical magnetostrictive units today. The dual compartment design allows for separation of wiring and electronics and helps facilitate simple, easy installation and set-up for both top and bottom mount versions.
With a Jupiter Magnetostrictive Transmitter, an Orion MLI offers high accuracy and high linearity at a reasonable price.
Measurement Principle
A low energy pulse, generated by the Jupiter electronics, travels the length of the magnetostrictive wire. A return signal is generated from the precise location where the magnetic field of a float intersects the wire. A timer precisely measures the elapsed time between the generation of the pulse, and the return of the acoustic signal.
Features
· 4-20 mA output
· LCD with pushbutton operation
· Ergonomic dual compartment enclosure
· Simple set-up and configuration
· Easy attachment to an MLI
· Direct insertion for a wide variety of vessels and applications
Applications
· Separators
· Surge Tanks
· Gas Chillers
· Biotherapuetics
· Pharmaceuticals
· Process Vessels
Options
· HART? Communications
· Hasloy? or Monel? materials of construction
· Threaded or flanged process connections
· External Jupiter models can be top or bottom mounted to an MLI
Product Literature
Sales Literature
Size: 834.6 kb
Fieldbus Instruction Manual
Size: 985.8 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Standard Instruction Manual
Size: 1070.6 kb
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration
北京恒遠安諾科技有限公司經銷各種歐美*液位計
ELS950光電液位開關
產品描述:
熱塑性彈性體的過度模鑄電子
沒有運動部件
耐用,足以應付惡劣的環境中
ELS-950是所有進口光電液位開關里體積zui小的一款,但它也帶有zui高操作溫度的能力,該產品聚砜的材質,確保這傳感器是兼容的使用在廣泛的媒體。該ELS-950進口光電液位開關的設計特點是過分成型電子插入,熱塑性彈性體的絕緣電線,氟O形密封圈創建節水型緊湊,耐環境大會。該ELS-950進口光電液位開關是一個很好的價值,使其成為一個*的選擇工業原始設備制造商渴望極少數,沒有任何運動部件傳感器額定的高溫天氣。
應用領域:
制冷劑水庫監測和預警
醫療診斷,滅菌器,洗衣機和透析設備
低潤滑劑警告,對機床,發電機組,對-或關閉公路的車輛
低水平的警告在液壓水庫
塑料溢出瓶,塑料散熱器
技術參數:
材質 聚砜
工作壓力 0-250 PSI
工作溫度 -40-110°C
吸入電流 約18mA
輸入電壓 5VDC或12VDC
輸出 TTL/CMOS兼容集電極開路輸出的zui大吸入電流為40mA,zui大30VDC
重復性 ±1mm
認證 CE, UL
FMU30超聲波液位計
產品描述:
FMU30超聲波液位計——德國E+H超聲波液位計,能*替代FMU231E-AA32和FMU230的超聲波液位計FMU30,
FMU30超聲波液位計性能參數
FMU30超聲波液位計液體量程:5m OR 8m
分辨率:1mm
精度:±3 mm OR 0.2%
盲區:25cm OR 35cm
供電:24VDC(標準);220VAC(可選)
FMU30超聲波液位計顯示:清晰的多行文本圖解顯示、包絡線顯示
輸出:4-20mA
過程連接:1-1/2"(5m),2"(8m)
外殼材質:F16塑料 透明顯示蓋
FMU30超聲波液位計優勢特性
是FMU230、FMU231的理想升級替代品
防護等級好,性價比高
菜單引導功能,輕松實現現場操作
FMU30超聲波液位計典型應用
污水提升泵站、污水處理池
廢水、泥漿、石灰漿
地下油罐
流動性好的固體粉料、顆粒料
超聲波液位計FMU30-AAHEAAGGF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AA] 傳感器: 1-1/2"; 5m 液體/2m 固體; 0.25m
[GGF] 過程連接: 螺紋 ISO228 G1-1/2, PP
超聲波液位計FMU30-AAHEABGHF
SPK: FJC
[AA] 認證: 非防爆場合
[H] 顯示,操作: 現場包絡線顯示,按鍵
[E] 電氣連接: 電纜密封套 M20, IP68
[AB] 傳感器: 2"; 8m 液體/3.5m 固體; 0.35m
[GHF] 過程連接: 螺紋 ISO228 G2, PP
應用
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
1.FMU 230
固體測量范圍:2m
液體測量范圍:4m
2. FMU231E-AA32
固體測量范圍:3.5m
液體測量范圍:7m
兩種變送器都配有一體化的溫度傳感器,用于對時間行程測量原理的補償。
性能和優點
1. 螺紋連接G1?",1?NPT"或G2",2"NPT
2. 可旋轉外殼
3. 帶可選現場顯示,按鈕操作簡便
4. LED發光顯示能快速監測操作狀態
5. 兩線制供電
FMU231E-AA32優點:
■ 非接觸測量,與材料特性幾乎無關
■ 集成溫度傳感器的傳輸時間修正,甚至溫度變化時,測量仍然準確
■ 測量值以任意單位輸出的線性化功能
■ 帶可選擇的顯示器
■ 通過 G1?"、G2"、NPT 1?" 或 NPT 2" 螺絲簡單固定
■ 二線制儀表,物位由 4-20 mA 輸出電流顯示
■ 可旋轉外殼
■ 帶可選現場顯示,按鈕操作簡便
■ LED發光顯示能快速監測操作狀態
■ 兩線制供電
FMU231E-AA32性能特點
參考工作條件 在下列參考條件下,的性能特點有效:
■ 溫度 = +20 °C
■ 壓力 = 1013 mbar abs.
■ 濕度 = 60 %
■ 理想的反射面(如平靜、平坦的液體表面)
■ 信號波束內無干擾反射
U001-0063液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
flow.
技術參數:
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durableMaximum Temperature Rating 135°C (300°F) Operating Temperature Electronics: 20° to 65°C (14° to 150°F) Pressure Drop 0.5 psi or less @ 10ft/sec for all pipe sizes 1.5" dia and up Accuracy ±1% of rate over optimum flow range* Repeatability ±0.5% =10 upstream and =5 downstream straight pipe diameters, uninterrupted
U001-0098液位計
產品描述:
Cast brass construction with tungsten carbide and stainless steel meter...long, trouble-free life Rugged, compact design with two temperature probes
Minimal connections...simplify installation, saving time and money
Integration of flow and temperature sensors with metering components...single simple solution for metering
Pulse, BACnet, and Modbus protocols are standard features...compatibility with existing control systems
Multiple size options...installation flexibility
Nine visible status LEDs (power, run, pulse, and more)
Liquid-tight wiring ports for reliability
NEMA 4 housing for durability
Input Power 12-35VDC/12-28VAC
Communication Modbus RTU, BACnet MSTP, Pulse
Output Scaled pulse, open drain
Accuracy ±3% flow
Housing NEMA 4
技術參數:
Housing Polycarbonate
Flow Sensor PEEK/stainless steel
Potting Material Polyurethane
Tee Material Brass
Environmental:
Fluid Temperature chilled: -20° to 60°C (-4° to 140°F); hot: 4° to 125°C (39° to 257°F)
Ambient Temperature -20° to 65°C (-4° to 149°F)
U001-0021液位計
產品描述:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
技術參數:
The Veris direct insert style liquid flow sensor with stainless steel/PPS tip combines flow sensing with a built-in transmitter for an all-in-one flow measuring system. This device fits all 1-1/2" to 10" (38 to 254mm) pipes, and it is intended for direct installation into the pipe through a 1" tap.
APPLICATIONS
Flow measuring projects
Features
NEMA 4 electronics housing...rugged and weather-proof
4-20 mA output
Viton? O-ring seal...no leaks
Stainless steel impeller, tungsten carbide shaft and polyamide-imide bearing...highly durable
8137雷達液位計
產品描述:
The Type 8137 is a non-contact radar leveltransmitter for continuous level measurement.The unit is available in two versions:with thread and horn antenna (? 40 mm) particularlysuitable for use in small tanks and process vessels for measurement of practically ny product. with flange and horn antenna (? 40 or 75 mm) particularly suitable for use in storage tanks and process vessels for measurement of products such as solvent, hydrocarbons and fuels under extremely difficult process conditions.
Materials
Housing / Cover
Seal ring / Ground terminal
Wetted parts
Process fitting
Seal (threaded version)
Antenna
Antenna cone
Seal (antenna system)
PBT, Stainless steel 316L / PC
NBR / Stainless steel 316Ti/316L (1.4571/1.4435)
Stainless steel 316L
Klingersil C-4400
Stainless steel 316L
PTFE (TFM 1600 PTFE)
FKM
Display * LCD in full dot matrix (in option)
Process fitting Thread G 1“1/2 A or NPT 1“1/2
Flange DN50 or 100 DIN2501, 2" or 4" ANSI B16.5
Electrical connection Cable glands M20 x 1.5
Measuring type Distance between process fitting and product surface
Min. dielectric figure ?r > 1.6
Dead zone 50 mm
Measuring range 0.05 up to 10 m (recommended - antenna with ? 40 mm)
0.05 up to 30 m (recommended - antenna with ? 75 mm)
Process temperature -40 up to +130°C (-40 to 266 °F)
Vessel pressure -1 up to 40 bar (-14.51 to 580,4 PSI) (-100 up to 4000 kPa) or
according flange rules
Vibration resistance Mechanical vibrations with 4.g and 5...100 Hz
8112液位傳感器
產品描述:
The 8112 is a vibrating level switch for liquids,using a tuning fork for level detection.It is designed for industrial use in areas of process technology and can be used in liquids.Typical applications are overfill or dry run protection.The Type 8112 is available with different sensorlength using tube extension. The rightlength can be adapted thanks to a lock fitting.Due to the simple and rugged measuringsystem, the 8112 is virtually unaffected by thechemical and physical features of the liquid.It works even under unfavourable conditionssuch as turbulence, air bubbles, foam generation,buildup or varying products.
Materials
Housing / Cover / Seal ring
Wetted parts
Tuning fork and process fitting
Extension tube ? 21.3
Process seal
PBT, Stainless steel 316L (1.4435) / PC / EPDM
Stainless steel 316L (1.4435)
Stainless steel 316L (1.4435)
FKM
Weight approx. 890 g + approx. 110 g/m (tube extension)
Electrical connections 1 or 2 cable glands M20 x 1.5 (depends on output version)
Process fitting Thread G, NPT 3/4", G, NPT 1" or Clamp 2"
Surface finishing quality Ra < 3.2 μm (thread) / Ra < 0.8 μm (Clamp)
Extension tube length 200 ... 1000 mm
Viscosity dynamic 0.1 up to 10000 mPa.s (requirement: with density 1)
Density 0.5 up to 2.5 g/cm3 (selected by DIP switch) or 0.7 up to 2.5 g/cm3
Fluid temperature -50 up to 150°C (-58 to 302°F)
Fluid pressure -1 to 64 bar (-14.51 to 928.64 PSI)
Accuracy
Hysteresis
Delay time / Frequency
Approx. 2 mm with vertical installation
Approx. 500 ms / Approx. 1200 Hz
Output Double relay output or Namur output
Environment
Ambient temperature -40 up to +70°C (-40 to 158°F) (Operating);
-40 up to +80°C (-40 to 176°F) (Storage)
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
FMI51電容式液位計
產品描述:
產品簡介
智能變送器,用于連續物位測量,經濟型4...20mA兩線制技術,適用于
危險區域
產品應用
一體化變送器用于液體的連續物位測量,且當液體的電導率達100μS/cm時測量與介電常數(DK)無關。因此可用于測量多種液體,且無須重復標定。
產品性能
當介質電導率達100μS/cm時無須標定
適用于測量界面
多種證書和認證,能夠在各種場合下應用
符合IEC61508功能安全SIL2的要求,可應用于安全系統中
接觸過程的部分材質為耐腐蝕性材質,接觸介質部分為FDA-listed材質
測量值響應時間短,為0.3s
更換電子插件后無須重新標定
電子插件自監視功能
多種過程連接,也可用于衛生場合
內置補償
FMU95超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FMU231超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FTM51音叉料位開關
產品描述:
應用于細顆粒固體散料的限位監測,適用于防爆危險區
用于對粉料、細顆粒散料以及低密度散料進行控測的限位開關。品種齊全,應用廣泛,亦可用于粉塵或易燃氣體危險區。
帶延伸管,zui大4m,可在任何位置安裝
例:鋁質外殼(T13)帶獨立的連接腔室EEx de
典型應用:谷粒 、面粉、奶粉、可可粉、糖、動物飼料、洗滌粉、染料、粉料、石灰、水泥、沙粒、塑料粒子
性能和優點
固體散料限位檢測的產品,從1967年起就已投入實際應用中
無需標定:操作簡便,經濟實用(即插即用)
無機械部件:使用壽命長
對外部震動和粘結不敏感:免維護
開關狀態可通過表蓋上的視鏡顯示,便于監視
多種電子插件,例如:NAMUR,繼電器、晶閘管、PFM-信號輸出,用于可與工廠控制系統連接
通過塑料外殼F10的透明蓋可以監視開關狀態及進行簡單操作
短叉型(100mm叉體長度)
可選堆積和磨損顯示
可選密度設置和開關延遲
FMU230超聲波液位計
產品描述:
智能型一體化非接觸式連續物位測量儀,適用于各種過程控制系統
Prosonic T 適用于對液體及顆粒料位進行非接觸式連續物位測量的一體化儀表。有兩種不同測量范圍的變送器可供選擇。
固體測量范圍:2m
液體測量范圍:4m
性能和優點
螺紋連接G1?",1?NPT"或G2",2"NPT
可旋轉外殼
帶可選現場顯示,按鈕操作簡便
LED發光顯示能快速監測操作狀態
兩線制供電
操作
通過面板上的四個鍵-, +, V ,H ,可對參數進行設置、顯示,并可進入Endress+Hauser操作矩陣及其他功能:
對三個固定目標的回波自動抑制
線性化修正(11點)
零點和滿度標定
一級回波檢測(二次回波)
對干擾回波進行自動抑制
參數鎖定
主要技術參數
盲區:0.25M
振頻:70HZ
聲波發散角:а<5.5°
保護等級:IP67
測量誤差:zui大測量值的 0 . 2 5 %
分辨率:3MM
介質溫度: -40...+80°C ( 內含溫度傳感器)
工作壓力:螺紋連接3bar
安裝指導
安裝探頭時,應保證zui高物位在盲區以下,探頭端面應伸入罐內。(加安裝管時例外)
注意安裝角探頭應與物面垂直避開加料扇區
不可在一個罐內同時安裝兩個ProsonicT
不能將探頭安裝于罐中心
FMX167液位計
產品描述:
可靠防腐并帶有陶瓷測量單元的探頭,用于凈水、污水及鹽水的物位測量。
應用
用于靜壓式物位測量的壓力傳感器,E+H可提供以下三種類型:
FMX167外徑=22mm(0.87in):適用于測量飲用水和小口徑的管道
FMX167外徑=42mm(1.66in):重型探頭,采用齊平式膜片易于清洗,適用于污水處理廠
FMX167外徑=29mm(1.15in)用于測量鹽水
性能和優點
其機械結構對過載及腐蝕性介質具有高抵抗性
高精度、*穩定的陶瓷測量單元
密封的電子模塊及雙濾波壓力補償系統可抵抗氣候變化的影響
電子模塊可輸出4...20mA信號并同時帶有過壓保護的模塊
選擇集成的溫度傳感器Pt100可同時進行物位及溫度的測量
飲用水認證:KTM,ACS及NSF(操作)
防爆認證:ATEX,FM,CSA
相應的附件可提供完整的測量方案
磁性翻柱式液位計
產品描述:
工作原理
旁路管通過法蘭連接在貯罐液的側面,隨著內的液位上升下降,帶動管內一個含磁鋼組件的浮子也同時上升下降。旁路管是全封閉的,所以液位計/表中*同液體接觸的運動機件是浮子本身(見下圖)。
在旁路管外部一側是柯普樂?磁翻柱顯示部分,磁翻柱一半為白色,另一半為紅色(MRA)或者藍色(MRK)。MRA為塑料制成,MRK為陶瓷材料制成,磁翻柱軸徑向間隔距離為10mm。隨著浮子上升下降,裝在其頂部的*磁鐵的束性磁場“推"翻柱由白色轉為紅色(MRA)或者藍色(MRK),當浮子下降時,磁翻柱再轉為白色。這就是說,在任何給定時間,貯液罐內的液體量總是由紅色或藍色磁翻柱表示出來,而不需任何外加電源。
技術優點
設計簡單、堅固、緊湊
旁路管和顯示部分在耐壓耐氣上是隔離的
可測量和指示腐蝕性、易燃性、有毒、高溫、攪動的及污染的液體的液位
柯普樂?磁翻柱顯示,不需外加電源
由于采用耐腐蝕性強的材質,可應用于所有工業領域
設計壓力范圍為全真空至420bar
設計溫度范圍為-160℃至+450℃
特殊設計
食品工業設計
界面測量
搪瓷
FMU90超聲波液位變送器
產品描述:
現場安裝的超聲波變送器,可用于物位與流量的測量,操作簡單、靈活,功能強
應用
與Prosonic FDU 91/91F/92/93/95/96系列傳感器配套使用。
配備1個或2個超聲波探頭,FMU95配備5個或者10個超聲波探頭。
zui大量程范圍70米
可進行限位測量(zui多可帶6個繼電器)
多級泵控制(交互),隔柵控制
可對明渠和測量堰中的介質進行流量測量
性能和優點
變送器可用于現場或控制室
有中文操作界面
通過內置或外置傳感器進行超聲波運行時間的修正。
提供的“TOF-Tool-FieldTool Package"操作軟件使用戶能方便的對儀表進行調試。
常用的渠/堰的流量測量線形化表已預置,用戶可以自由選擇。
通過集成的流量曲線在線計算渠/堰中介質的流量。
通過HART或PROFIBUS DP的系統集成。
自動識別FDU 9x系列探頭
能與FDU8x系列探頭配合使用
FDU91超聲波液位傳感器
產品描述:
非接觸式連續測量物位和流量的探頭,適用于易爆危險區
應用
Prosonic FDU系列由九類不同測量范圍的探頭組成,對物位和流量進行連續、非接觸式測量。
FDU91,91F
液體測量范圍:10m(16ft)
固體測量范圍:5m(6.5ft)
FDU92,92F
液體測量范圍:20m(32ft)
固體測量范圍:10m(16ft)
FDU93
液體測量范圍:25m(65ft)
固體測量范圍:15m(33ft)
FDU95
固體測量范圍:45m(147ft)
FDU 96
固體測量范圍:70m(230ft)
被測介質可以是腐蝕性液體如:酸、堿等,或是粉末和塊狀
固體如:谷粒、煤、礦石和砂礫。
性能和優點
完整的探頭系列可完成非接觸式連續測量物位和流量
可應用于明渠、堰、罐器及儲罐的物位或流量測量
抗結垢和粘結
可選擇一體化的加熱器來防止探頭表面結冰
一體化溫度探頭用來補償超聲波的運行時間內的溫度變化
可方便的用法蘭或螺紋安裝(利用滑動式法蘭克進行齊平式安裝)
潛水型(IP68)
Model F50液位開關
產品描述:
Magnetrol flow switches are highly reliable devices utilized to sense the presence or absence of flow in horizontal pipelines. Disc actuated Model F50 switches are in-line type used for sensing clean liquids in 2 inch or smaller line sizes.
No calibration required
Bronze or stainless steel construction
Process pressures to 1150 psig (69 bar)
Process temperatures to +750° F (+399° C)
Actuation on increasing or decreasing flow
In-line mounting
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Tuffy? II浮球液位控制器
產品描述:
The Tuffy? II Liquid Level Switches are float-actuated devices designed for horizontal mounting in a tank or vessel through threaded or flanged pipe connections. The compact size allows for installation in small vessels, while its many features provide a variety of application uses. The single switch mechanism is available in SPDT or DPDT forms on units designed for fixed or adjustable, narrow or wide differential and interface service levels.
Features
Single electric switch for high or low level alarm or control functions
Spacious switch wiring compartment
Pressure ratings to 2160 psig (149 bar)
Process temperatures to +750° F (+399° C)
NACE and/or ASME B31.3 construction
Specific gravity as low as 0.40
Therma? TG1熱分散開關
產品描述:
Therma TG1 provides a two-wire, intrinsically safe circuit between the probe and remote din rail enclosure. The switch is suitable for liquid or gas flow, level, or interface detection using the proven thermal dispersion technology.
LEDs provide visual flow indication
24 VDC input power
mA output signal for diagnostics and repeatable flow/level indication
Adjustable set point and time delay
SPDT Alarm relay
OCT-400模擬發射機
產品描述:
The OCT-400 analog transmitter mounts directly to the side of the Atlas or Gemini Chamber, providing a continuous 4-20 mA output signal proportional to liquid level.
Using simple and reliable reed switches, surface mounted to a printed circuit board, the unit provides level accuracy of 0.50".
Each unit is manufactured with a stainless steel outer tube, which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations, and carries CSA approval.
The OCT-400 analog transmitter mounts directly to the side of the MLI chamber, providing a continuous 4-20 mA output signal proportional to liquid level. Using simple and reliable reed switches surface mounted to a printed circuit board, the unit provides level accuracy of ±0.50" (13 mm). Activated by the field of the float magnets, the transmitter is totally non-invasive and designed for years of maintenance free service.
Each unit is manufactured with a stainless steel outer tube which encases the reed switch assembly, and an aluminum or stainless steel enclosure which provides signal/power field wiring terminations.
Echo? 335四線非接觸式超聲波發射器
產品描述:
Echo Model 335 is a four-wire, integtal mount, ultrasonic non-contact transmitter for liquid level, volume, and open channel flow measurement. Featuring advanced digital signal processing and a powerful transducer, this versatile transmitter provides exceptional measurement performance in a wide variety of applications.
Plug-in 6-digit alphanumeric LCD module with custom graphics display
4-20 mA output with 600 ohm load
Advanced digital signal processing assures reliable measurement in difficult applications
Dual function bar graph displays echo signal strength or tank level
50 kHz transducer with 26 feet (8 meter) range
Narrow, 7 degree beam angle provides excellent performance in tanks with obstructions
Digital E3 Modulevel? 電子液位傳輸器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Kotron? 822/832/842多點式液位開關
產品描述:
The Sentinel is a powerful multi-point level switch for alarm or control applications. The microprocessor-based circuitry permits calibration with only a small change in level. Push buttons and display permit ease in calibration and set up.
Two to four relays yield wide application range
Optional intrinsically safe probe circuitry
3-button/4-digit display of data entry
Lead/Lag pump control
Continuous self-test
Eclipse? Enhanced 705導波雷達發射機
產品描述:
The Enhanced Eclipse Model 705 is now available with a 304 stainless steel housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements for the wetted and non-wetted materials, process connections, and surface finishes for the sanitary industries.
The Enhanced Eclipse Model 705 is a loop-powered, 24 VDC, level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology and is the easiest to configure transmitter on the market.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending flexibility.
Two-wire, 24 VDC, loop-powered, 4-20 mAdc level transmitter
Capable of "dry validation procedures" for extra cost savings
Probe designs for CIP & SIP cleaning
0.1% of span accuracy
0.025% of volume repeatability
Bent probes minimize retention volumes
Therma? TD2流量開關
產品描述:
Designed for use specifically in the clean or hygienic process industry, the Therma TD2 is an outstanding flow/level switch where easy external wipedown and a sensor free of cracks and crevices are required. The TD2 Thermal Dispersion Flow/Level switch provides continuous diagnostics, temperature compensation, narrow hysteresis, and fast response time for superior performance.
The TD2 switch uses either AC or DC input power, provides a DPDT relay output with a visual LED indication of status through the glass window in the cover. Other features include ability to electronically measure the set point, a mA output signal for trending and diagnostics and time delay.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
A non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence/absence of flow
Simple/fast calibration
Excellent low flow sensitivity
Echo? 961單點超聲波液位開關
產品描述:
Increasing demands for compliance with safety systems and overfill protection has mandated more reliable point level measurement. Echo? Model 961 Ultrasonic Level Switches meet these demands with advanced transducer designs, extensive hazardous location approvals, and a new self-test technology.
Model 961 offers the ultimate solution to reliable single point liquid level measurement. This advanced switch uses pulsed signal technology for superior performance in difficult process conditions, and to provide excellent immunity from sources of electrical noise interference. Extensive self-testing of the electronics and transducer make this advanced switch suitable for use in Safety Integrity Level (SIL) 2 loops.
The Echo 961 is equipped with advanced diagnostics that continuously check the sensor and electronics.The diagnostics also alarm for electrical noise interference from external sources.
No calibration
Loop current or relay output
Advanced diagnostics: sensor, electronics and electrical noise interference
LED indication for alarm status and error
Pushbuttons for manual testing of output
Metal and plastic sensors
Digital E3 Modulevel?電子液位變送器
產品描述:
The Digital E3 is an advanced, intrinsically safe two-wire instrument utilizing simple buoyancy principle to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a simple mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.
The Digital E3 Modulevel has microprocessor-based electronics with HART? compatible output, in addition to the standard 4-20 mA output. E3 supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and trending capabilities.
Two-wire, loop-powered, transmitter for level, interface or density measurement
No level change needed for configuration; no field calibration necessary
Safety Integrity Level (SIL) value of 2, SFF value of 92.3%
4-20 mA output signal
Two-line, 8-character LCD and 3-button keypad
Continuous self-test with 22 mA, 3.6 mA or hold fault indication, fully compliant with NAMUR NE 43
Modulevel? 氣動浮筒液位控制
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Model 7x2導波雷達探針
產品描述:
Choosing the proper Guided Wave Radar (GWR) probe is the most important decision in the application process. The probe configuration establishes fundamental performance characteristics. Coaxial, twin element (rod or cable) and single element (rod or cable) are the three basic configurations used today; each with specific strengths and weaknesses.
The Eclipse Single Rod Bulk Solids probe brings additional capabilities to the Eclipse GWR product line.
This probe is recommended for use in the lighter solids applications such as plastic pellets, grains and powders.
The 7x2 is available in lengths up to 75 feet and designed for a 3000 lb. pulldown force.
Single rod flexible design
Designed for a 3000 lb. pulldown force
Lengths to 75 feet
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Eclipse? Enhanced 705導波雷達發射器
產品描述:
The Enhanced Eclipse Model 705 is a 24 VDC loop-powered level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. This single transmitter can be used with all probe types and offers enhanced reliability, as demonstrated by a Safe Failure Fraction of 91%, allowing it to be used in SIL 2 loops.
This Eclipse transmitter is designed to provide measurement performance well beyond that of many traditional technologies. The innovative, patented enclosure is a first in the industry orienting both wiring and electronics compartments in the same plane; and, angled to maximize ease of wiring, configuration and data display.
Eclipse supports the FDT/DTM standard and a PACTware? PC software package allows for additional configuration and troubleshooting flexibility.
Low dielectric measurement capability (Er >_ 1.4)
Volumetric output
Quick connect/disconnect probe coupling
Operates in visible vapors and ignores most foams
IS, XP, and Non-Incendive approvals
Ignores coating buildup
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Therma? TD1/TD2液位開關
產品描述:
Therma Model TD1/TD2 flow/level/interface switches provide a new level of performance and reliability not found in previous switches. Continuous diagnostics with fault indication, temperature compensation, narrow hysteresis and fast response time make the TD1/TD2 the latest in thermal dispersion switch technology.
Temperature compensated to provide repeatable alarm under varying process temperatures
Continuous diagnostics detect sensor fault
Non-linear mA output signal can be used for trending, diagnostics and repeatable flow/level indication
Detects minimum flow or presence / absence of flow
Easy / fast calibration
Excellent low flow sensitivity
Modulevel? 氣動置換液位控制器
產品描述:
Modulevel pneumatic liquid level controls are displacer actuated level sensors that provide output signals in direct proportion to changes in liquid level.
Stable output signal is unaffected by surface turbulence
Standard models handle pressures to 4265 psig (294 bar)
Good for process temps. from -150° to +700° F (-100° to +370° C)
Visual indicator is independent of air supply
Accurate output signal provided over a wide specific gravity range
316 stainless steel displacer and trim
高壓外部液位開關
產品描述:
Displacer actuated external cage liquid level switches are external cage units that utilize a single switch mechanism for level alarm or control functions in higher pressure applications.
Features:
Fabricated carbon steel cages
B74 available with 304 or 316 stainless steel cages as standard
Sealed or flanged cages
Stainless steel displacers
Pressures to 5000 psig (345 bar)
Specific gravity as low as 0.40
Aurora?Magnetic液面指示器
產品描述:
Aurora combines the operating system of a conventional float-based MLI with the leading-edge Eclipse Guided Wave Radar transmitter developed for level measurement applications by Magnetrol. The result is true level-measurement redundancy in a single-chamber design.
Using a 3" or 4" chamber to house both the Eclipse coaxial style probe and the float, these devices operate seamlessly to provide continuous electronic Guided Wave Radar measurement and visual indication. There are six basic configuration styles, and over fifteen material selections for the Aurora.
For the first time ever, the ability to accuray and repeatedly measure ultra low dielectric media, high temperature/high pressure process conditions, and media with shifting and changing dielectric values can be accomplished with Aurora.
Measurement Principle
Change in the process tank level corresponds to change within the Aurora chamber. The float within the chamber actuates flags or a shuttle for visual indication while the Eclipse? GWR transmitter provides continuous electronic level measurement.
Features
· Eclipse GWR transmitter
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Custom scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1796.8 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Technical Comparison
Size: 153.8 kb
Enhanced Jupiter?磁致伸縮液面信號傳送器
產品描述:
The Jupiter Magnetostrictive level transmitter provides a 4-20 mA output, proportional to the level being measured. Jupiter models are designed to attach quickly and easily, via standard clamps, to Orion’s Atlas and Gemini magnetic level indicators or can be directly inserted into a wide variety of process vessels.
Packaged in an ergonomic dual compartment enclosure, the unit offers many features not found in typical magnetostrictive units today. The dual compartment design allows for separation of wiring and electronics and helps facilitate simple, easy installation and set-up for both top and bottom mount versions.
With a Jupiter Magnetostrictive Transmitter, an Orion MLI offers high accuracy and high linearity at a reasonable price.
Measurement Principle
A low energy pulse, generated by the Jupiter electronics, travels the length of the magnetostrictive wire. A return signal is generated from the precise location where the magnetic field of a float intersects the wire. A timer precisely measures the elapsed time between the generation of the pulse, and the return of the acoustic signal.
Features
· 4-20 mA output
· LCD with pushbutton operation
· Ergonomic dual compartment enclosure
· Simple set-up and configuration
· Easy attachment to an MLI
· Direct insertion for a wide variety of vessels and applications
Applications
· Separators
· Surge Tanks
· Gas Chillers
· Biotherapuetics
· Pharmaceuticals
· Process Vessels
Options
· HART? Communications
· Hasloy? or Monel? materials of construction
· Threaded or flanged process connections
· External Jupiter models can be top or bottom mounted to an MLI
Product Literature
Sales Literature
Size: 834.6 kb
Fieldbus Instruction Manual
Size: 985.8 kb
Orion Product Overview
Size: 1128 kb
SIL Brochure
Size: 656.2 kb
Standard Instruction Manual
Size: 1070.6 kb
Series 3 NACE外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to meet NACE MRO175 and MRO103 requirements. They are ideal for alarm and control set points in sour liquid applications.
Features:
NACE listed materials of construction with certificate of conformance
ASME Section IX welding done by qualified welders
Hardness testing of all welds and heat affected zones
Post Weld Heat Treatment (PWHT) to ensure acceptable hardness through the cross section of the weds and HAZ
Horizon? 704導波雷達發射器
產品描述:
The Horizon 704 is a loop-powered, 24 V DC liquid-level transmitter based upon the revolutionary Guided Wave Radar (GWR) technology. The electronics of the Horizon 704 is integral mount on the GWR probe and allows local calibration via a 3 pushbutton keypad / LCD screen.
The transmitter is designed to provide all of the performance advantages of GWR. Available in a nonrotatable, single compartment plastic or aluminum housing, this transmitter offers simple configuration with three push buttons and a 2-line × 8 character liquid crystal display. The Model 704 covers a broad application range by utilizing coaxial and twin rod probes.
Two-wire, 24 VDC loop-powered level transmitter
Low dielectric measurement capability
IS (intrinsically safe), XP (explosion proof), and Non- Sparking approvals
4.90 m (16 foot) maximum range
Model R82突發脈沖雷達發射機
產品描述:
Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.
Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications....until now. The R82 radar transmitter can be considered the answer to almost every, daily level measurement application imaginable.
Currently FM and CSA approvals (IS and NI) are pending.
24 VDC, loop-power with HART?
Housing: Lexan? or cast aluminum
Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
Antenna: Encapsulated horn - polypropylene or Tefzel?
Process Temperature: -40 to +200° F (-40 to +93° C)
Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)
Echo? 355雙線回路供電超聲波非接觸式發射機
產品描述:
Model 355 is a loop-powered ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART? communications are offered with a PACTware? PC program for remote configuration and troubleshooting.
PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
False target rejection for identification of true echo from liquid surface
Common tank shapes and 20-point custom table for volume measurement
Resettable and non-resettable 7-digit flow totalizers
Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation
Atlas? Magnetic液面指示器
產品描述:
The Atlas is standard, high performance magnetic level indicator. Atlas is a single chamber design with either 2", 2.5", or 3" chamber diameter, as required by the application. There are twelve basic configuration styles, including top mount models.
Atlas magnetic level indicators are produced in a wide range of materials of construction, including plastics. Orion also offers one of the most complete selections of process connection types and sizes in the industry.
Atlas may be equipped with a variety of level transmitters and switches, as well as, flag and shuttle indicators with or without stainless steel scales. This enables the Atlas to be a complete level and monitoring control.
Measurement Principle
A change of level in the process tank corresponds to a similar change within the Atlas chamber. In response to the level movement, the Atlas float moves accordingly, actuating the flags or shuttle for visual indication.
Features
Broad range of chamber styles
Fabricated non-magnetic chambers
ANSI and DIN flanges
Precision manufactured float
Flag or shuttle type indicator
Applications
Feedwater heaters
Industrial boilers
Oil water separators
Flash drums
Surge tanks
Gas chillers
Technology of the Atlas?
Magnetic Level Indicator
The appeal of magnetic level indicators is total isolation of the process within a sealed piping column. Elimination of leaking seals, clouded glasses, broken glass tubing, plus easy access cleaning and adaptation to a variety of mounting styles and process connections. Availability of switches and transmitters adds to their desirability by providing a much less expensive system than a build up of sight glasses, alarm switches and transmitters, all separay piped to the vessel.
Within the Atlas piping column is a float containing an internal group of magnets. A rise or fall of the fluid in the process tank corresponds to a similar change within the piping column. In response to the level movement the float moves up or down accordingly.
Clamped to the piping column in total isolation from the process liquid is a visual indictor housing. It contains the choice of indicator, either a series of flags or a follower.
The individual flags or the follower contain an alignment magnet which couples with the float magnets as the float moves up or down within the piping column. Float movement rotates the flags and changes their color, or in the case of the follower moves the follower to the point of level.
The position of the follower, or point at which the flags change color, represents true level. Level is indicated or "read" by the corresponding point on the measuring scale.
Series 3 ASME B31.3外部液位開關
產品描述:
The Series 3 level switches are designed, built and certified to ASME B31.3 process piping code requirements. They are ideal for critical alarm set points in clean liquid applications.
Features: 14 inch (356 mm) side/side process connections
Sealed or flanged float chamber design
Service pressurs to 2240 psig (154 bar)
Specific gravity ratings as low as 0.33
FM, CSA, ATEX and IEC approvals
Gemini? Magnetic液位指示器
產品描述:
Gemini’s twin chamber design is unique to the magnetic level gauge industry. Over 18 configuration styles are available with Gemini, and though not available in plastics, it may be produced in the same metal material selections as Atlas.
Gemini’s second chamber facilitates the installation of the Eclipse Guided Wave Radar transmitter, thus providing a totally redundant measurement system.
With standard magnetic indicators with side clamp-on transmitters, the float represents a single point of indication. If the float should become damaged due to violent process conditions, the signal from the analog transmitter is lost. With Gemini’s dual chamber design, Eclipse will continue to measure the liquid level accuray, repeatedly and reliably, as it is not dependent on interaction with the float.
Gemini’s magnetic indicator chamber can be equipped with switches, transmitters, blankets or heat tracing, while the secondary chamber houses the electronic measurement instrument.
Measurement Principle
Change in the process tank level correpsonds to change in the Gemini chamber. The float within the chamber actuates flags or a shuttle for visual indication. The instrument mounted within the second chamber also reacts according to the level change.
Features
· Unique dual chamber design
· Broad range of chamber styles
· Fabricated non-magnetic chamber
· ANSI and DIN flanges
· Precision manufactured float
· Flag or shuttle type indicator
Applications
· Feedwater heaters
· Industrial Boilers
· Oil water separators
· Flash drums
· Surge tanks
· Gas chillers
Options
· Level switches
· Level transmitters
· Stainless steel scale
· Customer scales
Product Literature
Instruction Manual
Size: 1121.4 kb
Sales Literature
Size: 1195.5 kb
Application Questionnaire
Size: 280.7 kb
Orion Product Overview
Size: 1128 kb
Technical Comparison
Size: 153.8 kb
Kotron? 801通用控制器(帶繼電器)
產品描述:
The Kotron Model 801 Transmitter is a multi-function transmitter that offers the user unparalleled power. The preamplifier circuit provides installation flexibility of a 2500 feet maximum remote distance. The Model 801 can interface with two separate vessels, essentially making it a mini-multiplexer, while software mathematics allow for the sum or differential of the two signals.
Level signal from one vessel can be mathematically added to, or subtracted from, another vessel
Level/Volume and Level/Open Channel Flow characterization
Integral keypad on front panel
Provides one 4-20 mA isolated analog output
16-character alphanumeric display
Dual input of two probes from separate vessels
Kotron? Model 804防爆傳感器
產品描述:
The Sentinel Model 804 is a unique, powerful level transmitter. The leading edge microprocessor-based circuitry has nonvolatile memory. The display and keypad simplify calibration and setup of the instrument. Powerful diagnostics not only check all functions of the system, they also simplify troubleshooting.
Two or four relays
Optional intrinsically safe probe circuitry
16-button keypad
2 line by 16 character LCD display
Powerful self-diagnostics check the system
Small change in level required for calibration